产品简介
磁栅控制器 TS-52 THE MAGNETIC MAGNETIC GRID CONTROLLER 准式测量,电池+外部电源供电,磁性位移传感器+功率继电器输出的一体化设计 Absolute type measuring, battery external power supply, Magnetic displacement sensor + power relay output integration design 6+4位高亮数码管显示 6+4- highlight digital tube display ......
详情介绍
- 特性
features - 技术参数
Technical parameters - 备注
Notes
- 系统精度
System accuracy - ±(0.03+0.01*L)mm
- L单位为:米
Unit: m
- 重复精度
Repeat accuracy - 0.01mm
-
- 测控范围
Range of measurement and control - -19999.9mm~99999.9mm
- 与分辨率设定有关
Associated with the DPI setting
- 显示分辨率
Display resolution - 0.01mm/0.05mm/0.1mm
- 可设定
Can be set to
- 电源电压
Power supply voltage - AC220V/AC110V
-
- 后备电池
Backup battery - 1节2号 1.5v(LR14)
1 2nd 1.5v(LR14) - 寿命约2.5年
Life is about 2.5 years
- 整机功耗
Machine power consumption - 小于4W
-
- 测控速度
Control speed - MAX2.5m/S
-
- 适用磁尺
Applied magnetic ruler - 5mm+5mm
-
- 读头与磁带间距
Read head and the tape space - 0.5mm------2.0mm
-
- 输出形式
Output form - 继电器常开
Relay normally open -
- 输出触点功率
Contact power output - AC220V/5A DC24V/10A
-
- 传感器线长度
Sensor cable length - 1m------15m
- 可定制
Can be customized
- 传感器防护等级
Sensor protection rating - IP67
-
- 工作温度
Working temperature - -10℃......+60℃
-
- 存储温度
Storage temperature range - -30℃......+80℃
-
磁栅控制器优点
具备磁栅測量仪的一切优点。直接测量控制,无机械转换误差。驱动控制大功率普通电机(交流或直流电机)。控制系统性价比高。
Magnetic grid controller advantages
With all advantages of magnetic measuring instrument. Direct measurement and control, no mechanical conversion errors. Drive control power General Motors(AC or DC motors) Control system for high cost performance.
- 上一篇: 磁栅控制器 TS-50
- 下一篇: 增量式磁栅编码器LMD
所有评论仅代表网友意见,与本站立场无关。