产品简介
磁栅控制模块MS51 MAGNETIC GRID CONTROL MODULE 准式测量,电池+外部电源供电,磁性位移传感器+功率继电器输出的一体化设计 Quasi absolute measurement, battery+ external power supply, integrated design of magnetic displacement sensor power relay output 公制/英制可切换 Metric/inch switch ......
详情介绍
- 特性
features - 技术参数
Technical parameters - 备注
Notes
- 系统精度
System accuracy - ±(0.03+0.01*L)mm
- L单位为:米
Unit: m
- 重复精度
Repeat accuracy - 0.01mm
-
- 测控范围
Range of measurement and control - -19999.9mm~99999.9mm
- 与分辨率设定有关
Associated with the DPI setting
- 显示分辨率
Display resolution - 0.01mm/0.05mm/0.1mm
- 可设定
Can be set to
- 电源电压
Power supply voltage - DC24V
-
- 后备电池
Backup battery - 1节2号 1.5v(LR14)
1 2nd 1.5v(LR14) - 寿命约2.5年
Life is about 2.5 years
- 整机功耗
Machine power consumption - 小于4W
-
- 测控速度
Control speed - MAX2.5m/S
-
- 适用磁尺
Applied magnetic ruler - 5mm+5mm
-
- 读头与磁带间距
Read head and the tape space - 0.5mm------2.0mm
-
- 输出形式
Output form - 继电器 常开
Relay normally open - 可定制脉冲+方向输出
Customizable pulse + direction output
- 输出触点功率
Contact power output - AC220V/5A DC24V/10A
-
- 传感器线长度
Sensor cable length - 1m------15m
- 可定制
Can be customized
- 传感器防护等级
Sensor protection rating - IP67
-
- 工作温度
Working temperature - -10℃......+60℃
-
- 存储温度
Storage temperature range - -30℃......+80℃
-
磁柵控制器优点:
具备磁柵测量仪的一切优点。直接测量控制,无机械转换误差。驱动控制大功率普通电机(交流或直流电机)。控制系统性价比高。
Magnetic grid controller advantages:
With all advantages of magnetic measuring instrument. Direct measurement and control, no mechanical conversion errors. Drive control power General Motors(AC or DC motors). Control system for high cost performance.
- 上一篇: 增量式磁栅编码器LMD
- 下一篇: 磁栅控制模块MS52
所有评论仅代表网友意见,与本站立场无关。